Arts and Crafts Entry Arbors Craftsman Arbor four post arbors Arching Arbors for gates Custom Wood Arbors Arbor Designs Garden trellis Gate Hardware Gate Arbors Charles Prowell Woodworks
Products Gate Hardware Contact About Us Payment Gateway Site Map

charles prowell woodworks
Gate Arbor

>>HOW TO ORDER CPW'S
CUSTOM WOOD ARBORS

Featured in
This Old House Magazine
Gate Arbor

Garden Gate Arbor #14

For 4x4 posts.  Arbor truss width at 3-1/2"
(Posts not included)
<to 4' width
<to 6' width
<to 8' width
< to 3-ft depth
$2600
$3200
$4900
<to 5-ft depth
$3100
$3700
$5400
For 6x6 posts.  Arbor truss width at 5-1/2"
(Posts not included)
<to 4' width
<to 6' width
<to 8' width
< to 3-ft depth
$2900
$3500
$5200
<to 5-ft depth
$3400
$4000
$5700


Gate ArborThe Garden Arbor #14 features a full radius with a height that is half the width of the distance between your gate posts. specifications:

* Full 180-degree radius, with mortised slats. 
* Arched trusses at 1-1/2" thickness x 3-1/2" width.  
* Built to your specified dimensions and shipped fully assembled.
Gate Arbor
Wood Arbors


Gate ArborGarden Arbor #14 set to 4x4 posts in Mill Valley, CA. 
Gate Arbor
garden arbors that are arched


Gate Arbor
Garden Arbor #14-1


Gate Arbor The original Garden Arbor #14 from a home in Sausalito, CA, showing flanking panels on either side of the gate/arbor, as well as 'foyer' panels within the depth of the arbor entry.  Although we will often include a keystone, it is now inlaid flush to the arbor truss instead of as shown below.
custom wood arbor

Gate ArborCPW Arbors arrive with the mounting caps fixed to the arbor trusses.  Depending on the application, the caps mount to your posts, columns, or wall-tops with either wood screws through the pre-bored holes in the caps, or with the threaded rod shown on the left.  A corresponding hole is bored into the tops of the site posts, allowing the threaded rod to 'seat' itself.  Construction caulk adhesive or epoxy is recommended.  
Gate Arbor


Gate Arbors
The Designs of Charles Prowell Woodworks are protected by Patents and Patents Pending.

 

#14--(0935-McCarthy)
#14-1 (-0113-Carlson)