]  |
|
|
For
this steep uphill drive, a pair of Driveway Gates swinging
out as a single gate, with embedded steel frames. For
out-swing gates, an option is to mount the motors on the street
side, or lose approximately 13" clearance by mounting
them on the inside, with the motor arms 'pushing' the gate
open. Most local codes require the gate be set at least
12' in front the street for out-swing gates.
--A third option is the SEA 400 sub-grade invisible motor,
which rests beneath the gate with a pin hinge system.
|
|
The
West Enty to this Miami property--
The Call-Box is often set 7-10 feet streetside of
an in-swinging Drive Gate. Call-boxes are utilized when the gateway
cannot be seen from the house, allowing visitor access from the
telephone. 