FAQ

Wall-Top Pony Panels

For Pony Panels with Pattern Blocks, as shown below, add $175 / panel.

 

Fence #26

Price: Base Cost
(listed under Pony Panels)
  Often, we're met with a plain stucco wall encompassing the back yard area.  The Pony Panels were introduced to not only increase the privacy height, but to do so with the friendly design of our new Pony Panels.  Usually about 20" height, they can also include the posts and caps. 

  With all four sides of the yard wrapped with the panels, we have elected to include one panel per wall section that features our 'Pattern Blocks', simply to introduce a little design variation.
The posts were designed to mount using embedded threaded rod to avoid any visible brackets or hardware.  The posts were supplied by CPW, arriving with the bottoms pre-bored and a drilling jig to help the installer in aligning the bores into the wall-top.

  Illustrating how the matching drive gates are off-set to incorporate a pedestrian gate.

 
   
Shop Photos
 
A stack of Pony Panels ready to crate.
The Pattern Block Panels:  Base  +$175.
   

Because it's always interesting to look at houses, we include this, with its front facade brick and stone veneer that defies being categorized.  The old existing gate on the left. 
BACK to Gallery #3 Fences
The Designs of Charles Prowell Woodworks are protected by Patents and Patents Pending.



1 . 8 0 0 . 46 6 . 1 8 5 0

1 .7 0 7 . 8 2 3 . 3 7 1 1 (PST)

SHIPPING TO ALL 50 STATES
©1996-2008 Charles Prowell.
All rights reserved

 

 

 

0706FL-Murphy