_fencecost.htm

--CPW ships to all 50 states

Listed below are the costs for a standard Base Style Panel.
Because the Panels are custom, and often designed to your existing architectural
precedents, various styles are afixed a certain percentage over or under the base costs.

"The Quality will remain long after the price is forgotten." Frederick Henry Royce (of Rolls-Royce)

SINGLE PANEL PRICE TABLE ( 12 or LESS ) Base Price Reference
Made-To-Order	<4' ht	<6' ht	<8' ht
<36" Width	$650	$700	$900
<64" Width	$850	$1000	$1200

Panel widths extend to a maximum 64". Take your overall linear feet of fence, translate that into inches, and divide by 70"( if using 6x6 posts). This wll give you the panel count.

VOLUME PRICE TABLE ( 12 or MORE )

Made-To-Order

subtract 25% from the above prices

Don't forget the percentage assigned to the specific panel styles.

WALL-TOP PONY PANELS To see an example of a Wall-top Pony Panel to 24" ht
Max. 64" width	$675/ea

VOLUME PRICE TABLE ( 12 or MORE )

Made-To-Order

subtract 20% from the above prices

Don't forget the percentage assigned to the specific styles.

STANDARD POST CAPS
For CPW Gate and Fence Panel Patrons:
Order your post caps direct by clicking on the image below

6x6 cedar (5-5/8" nominal) $11.50 each		4x4 cedar (3-5/8" nominal) $8.50

CPW POST CAPS

25 or less $200/ each		25-100 $125/each

We make the following modifications on panels wider than 64" and higher than 6’ so nothing is lost on the structural integrity of the unit:
Please call or write for price quotes on these extended panels
1. For heights beyond 6-ft----We add a second horizontal rail in the middle creating two lower sections, controlling the vertical expanse, as shown in #11
2. For widths beyond 5-ft-----We add a gabled cap (seen as an architectural element) to the top and bottom rails (that is dadoed and assembled onsite) for the lateral rigidity. A larger perspective can be seen in #19.

Panels are shipped unfinished.

Note: All commissions include, upon receipt of advance payment, a posting of statements, drawings, site photos (when applicable) and any data that might simplify communications. This site is available normally withinone week of payment and remains active for the duration of the project. Upon receipt of an email linking you to your site, it is necessary to review and confirm the data before work can begin.

CPW Guarantee
We guarantee that you will be delighted. And if you are not, we will do everything in our power to remedy the situation.
Should our products fail at any time during the lifetime of the original owner because of workmanship, we will either
repair or replace it. Some customer-requested modifications might be excluded.

Production Centers
Oregon	California	Illinois	N. Carolina

Extraneous Notes and Explanations

An important note regardimng your posts. Below is a link to an example post setting. It will make the difference between a post with an 8-year life and a post with a 30-year life. When investing in the CPW fencelines, don't allow an improperly set post to be your weakest link. Insist your installer follow this method for posts that are to be set into the grade. Other methods, such as above-grade brackets and threaded rod are acceptable as well.

Our modular Wood Fence Design is a standard 64" in length by 1-1/2-inches thick and range from 36-to-96-inches in height. Panels between 60" and 96" width are provided with top and lower gabled caps to provide needed rigidity (Image below). Panels beyond 6' height with lower solid panels are often amended to incorporate an extra panel and mid horizontal rail, such as seen in #11. Multiple Wood Fence Panel lengths are configured to equal lengths along any given fenceline dimension, with narrow flanking panels often set to each side of the gates. As an approximate price guide, take the length of your proposed fenceline, translate it into inches and divide it by 69-1/2-inches for the approximate number of panels necessary (This includes a maximum length 5-ft panel and the width of a typical surfaced 6x6 post. For 4x4 posts, divide by 67.5inches).

Random fence panels are shown with optional Pattern Blocks.* Pattern Blocks are small blocks tenoned to the pickets to create a subtle break from the linear repetition.

*You can relate your dimensions by email, over the phone, or fax a plan view sketch showing proposed gate setting and all necessary dimensions. All orders are provided with scaled drawings and elevations upon receipt of payment, confirming specifications while providing an opportunity for requested revisions before work begins. All orders are accompanied with a detailed installation procedure. (Fax: 815-328-2851)

*Decorative Pattern Panels: Here we have offered a few interesting patterns to consider as 1) stand-alone garden dividers
2) mounted to sidewalls such as masonry walls or the house/garage walls, and 3) as a fenceline itself. The Plexiglas inserts shown in many of the patterns is optional.

Confused? If it all seems too confusing, simply send an email or call for preliminary costs and timetables. Mention your preferred Fence Style and height, with approximate dimensions. Include your Zip Code for shipping costs. You'll receive a quote and approximate timetable for delivery. The next step is to secure accurate dimensions. Your earlier quote may vary slightly as a result. Finally, an advance payment of 50% by card or check. This simply secures your place in the schedule and your payment is not processed until work begins. Within one week, drawings are posted and you are notified by email with a link to your new site asking you to review these drawings before work begins.
Click on the example layout for a walk-through.

Example Layout

How to set your fence posts to last 30-40 years!

Direct Order Post Caps

* Shipping and crating on quote (Please include Zip Code)
* Listed fence costs do not include posts & post caps.
* Elevation drawings, labeled for a specified installation sequence, accompany all fence orders.
* Technical support is available to all third-party installers by phone (707-823-3711)or email <support@prowellwoodworks.com>
VISA / MASTERCARD / AMERICAN EXPRESS / DISCOVER and PAYPAL accepted

SEAL YOUR PANELS

To Recommended Finishes

Regarding Panel Installation

--CPW does not offer installations. Homeowners are responsible for securing the installation of their CPW products. So be careful, and don't end up like the poor sap on the right.
--We can, on occasion, help to secure a referral in your area and we will be glad to do this whenever possible. The contacts you are provided with will come as a result of repeated high marks from previous CPW patrons. But these are only referrals and CPW is not responsible for their work.

-It is always best to refer your installer or contractor to the web site to familiarize themselves with the level of quality of CPW products, as well as to thePDF Installation Guides, located through the below link or under the Site Map on every page.

--Technical support is available to all homeowners and third-party installers by phone
707-823-3711 or email <support@prowellwoodworks.com>

--Installallation guidelines:
---------Installation guide for gates, Drive Gates, Fence Panels, Arbors, Columns

Illustrating the gabled cap for extended, rare widths beyond 60".

Regarding Shipping

1) A typical wood gate within the Continental United States ships FedEx freight. 2) If you order an item, we will provide a quote, where necessary, for standard shipping. The independent courier may have an additional charge for redelivery and making appointments. We will not be responsible for any of these charges. 3) When items are shipped motor freight, the items become the property of the purchaser when they leave our dock. Motor freight companies may have strict policies regarding damaged freight. If you sign for a damaged package without noting the damage at the time of the delivery, they will often not allow the claim. If you detect some damage to the crate, please make a note of this on the Bill of Lading the driver will ask you to sign. You do not need to refuse delivery or ask the driver to wait. Your signed note will be sufficient in the event of a claim.4) Please make sure you understand the shipping options and how your order will ship before placing an order.

Relax. We use durable, ribbed crates. As of summer 2003, only one shipment has arrived with damage. This, in June 2003, involved a small break on a single rail of a single panel and CPW replaced it without question. The fault was ours.

To View Typical Crate

Listed below are the costs for a standard Base Style Panel. Because the Panels are custom, and often designed to your existing architectural precedents, various styles are afixed a certain percentage over or under the base costs.

"The Quality will remain long after the price is forgotten." Frederick Henry Royce (of Rolls-Royce)

SINGLE PANEL PRICE TABLE ( 12 or LESS ) Base Price Reference

Made-To-Order

<4' ht

<6' ht

<8' ht

<36" Width

$650

$700

$900

<64" Width

$850

$1000

$1200

Panel widths extend to a maximum 64". Take your overall linear feet of fence, translate that into inches, and divide by 70"( if using 6x6 posts). This wll give you the panel count.

VOLUME PRICE TABLE ( 12 or MORE )

Made-To-Order subtract 25% from the above prices

Don't forget the percentage assigned to the specific panel styles.

WALL-TOP PONY PANELS To see an example of a Wall-top Pony Panel

to 24" ht

Max. 64" width

$675/ea

VOLUME PRICE TABLE ( 12 or MORE )

Made-To-Order subtract 20% from the above prices

Don't forget the percentage assigned to the specific styles.

STANDARD POST CAPS For CPW Gate and Fence Panel Patrons: Order your post caps direct by clicking on the image below

6x6 cedar (5-5/8" nominal)

$11.50 each

4x4 cedar (3-5/8" nominal) $8.50

CPW POST CAPS

25 or less

$200/ each

25-100 $125/each

Panels are shipped unfinished.

Production Centers

Oregon

California

Illinois

N. Carolina

Extraneous Notes and Explanations

*Random fence panels are shown with optional Pattern Blocks. Pattern Blocks are small blocks tenoned to the pickets to create a subtle break from the linear repetition.

*Decorative Pattern Panels: Here we have offered a few interesting patterns to consider as 1) stand-alone garden dividers 2) mounted to sidewalls such as masonry walls or the house/garage walls, and 3) as a fenceline itself. The Plexiglas inserts shown in many of the patterns is optional.

SEAL YOUR PANELS To Recommended Finishes

Regarding Panel Installation

--Technical support is available to all homeowners and third-party installers by phone 707-823-3711 or email <support@prowellwoodworks.com>

--Installallation guidelines: ---------Installation guide for gates, Drive Gates, Fence Panels, Arbors, Columns

Illustrating the gabled cap for extended, rare widths beyond 60".

Regarding Shipping

Gate Fence Panels are shipped or delivered in unfinished Western or Port Orford cedar.

1 . 8 0 0 . 46 6 . 1 8 5 0 1 .7 0 7 . 8 2 3 . 3 7 1 1 (PST)

Listed below are the costs for a standard Base Style Panel.
Because the Panels are custom, and often designed to your existing architectural
precedents, various styles are afixed a certain percentage over or under the base costs.

SINGLE PANEL PRICE TABLE ( 12 or LESS )
Base Price Reference

Made-To-Order

subtract 25% from the above prices

WALL-TOP PONY PANELS
To see an example of a Wall-top Pony Panel

Made-To-Order

subtract 20% from the above prices

STANDARD POST CAPS
For CPW Gate and Fence Panel Patrons:
Order your post caps direct by clicking on the image below

6x6 cedar
(5-5/8" nominal)

4x4 cedar
(3-5/8" nominal)

$8.50

25-100

$125/each

Random fence panels are shown with optional Pattern Blocks.* Pattern Blocks are small blocks tenoned to the pickets to create a subtle break from the linear repetition.

*Decorative Pattern Panels: Here we have offered a few interesting patterns to consider as 1) stand-alone garden dividers
2) mounted to sidewalls such as masonry walls or the house/garage walls, and 3) as a fenceline itself. The Plexiglas inserts shown in many of the patterns is optional.

SEAL YOUR PANELS

To Recommended Finishes

--Technical support is available to all homeowners and third-party installers by phone
707-823-3711 or email <support@prowellwoodworks.com>

--Installallation guidelines:
---------Installation guide for gates, Drive Gates, Fence Panels, Arbors, Columns

1 . 8 0 0 . 46 6 . 1 8 5 0

1 .7 0 7 . 8 2 3 . 3 7 1 1 (PST)