FAQ

 
CPW's Landscape Lighting Bollard for the Path, Walkway, or Garden setting.    A simple but elegant Bollard available to your specified heights.  Hollow columns with inset aluminum mounting tubes, or brackets.

12 -volt light thrown from the slotted light-holes within the aprons of the cap for a soft indirect illumination. 
FAQ
Landscape Lighting Bollard   #11
A series of this style scattered about a Portland residence
For existing masonry or stone applications, the #11 Landscape Lighting Bollards are provided with inserted 1"-diameter aluminum tubes that set to the masonry or stone slab.  The Column slides over the top of the tube and secured with two set screws.
Walkway Landscape Lights

Outdoor Path Lighting
For grade mounts, the Landscape Lighting Fixture includes a 1" diameter aluminum tube that sets in the grade.  The tube is secured in place by tightening the set screws on the surface of the column.  Low voltage wiring is trenched to a junction box set near the Bollard, just below grade. 
Low Voltage Landscape Lighting
Outdoor Landscape Lighting


A series of #11 Landscape Bollards mounted along a terraced area flanking the front entry walk. 
Landscape Lighting designs
Outdoor Li9ghting Fixtures


Back To Gallery 5

NEXT
To Pricing

The Designs of Charles Prowell Woodworks are protected by Patents and Patents Pending.


1 . 8 0 0 . 46 6 . 1 8 5 0

1 .7 0 7 . 8 2 3 . 3 7 1 1 (PST)

SHIPPING TO ALL 50 STATES
©1996-2008 Charles Prowell.
All rights reserved