FENCE PANEL #16

This Fence Style is Base Price + 20% (w/ Pattern Blocks)
Base Price +9% (w/o Pattern Blocks)
> Go to Base Price Table
Available to a maximum width of 72″
Max Height without Pattern Blocks: 60″
Max Height with Pattern Blocks: 72″ +

WOOD GARDEN FENCE #16-9

with full-width top rail
Mill Valley, CA

We open with Fence #16-9, illustrating our amended layout for the Pattern Blocks. Basically, every picket is supported by at least one Pattern Block. No pickets have Pattern Blocks joined to both edges. .

Featuring the top and bottom horizontal rails at the same width.

wood open picket garden fence 16-9. prowell

CUSTOM WOOD GARDEN FENCE #16-9

Mill Valley, CA

Fence style #16-9 with the Driveway Gates Style #4.

Automatic wood driveway gate #16-9b i Marin county, ca. prowell

CUSTOM WOOD GARDEN FENCE #16-9

Mill Valley, CA

Fence style #16-9 from the street. A complicated layout, with uneven sloping grades and loose stone walls. All of it ironed out and resolved by Prowell’s highly regarded installer Brian Van Rheenan.

CUSTOM WOOD GARDEN FENCE #16-9

Mill Valley, CA

A look at the ‘Before’ Photos sent in when first considering the project.

site layout for wood fence 16-9
site layout for fence 16-9. prowell

WOOD GARDEN FENCE #16-5

Narrower top rail width but more complex Pattern Block layout
Mill Valley, CA

Fence Style #16-5. Every picket is supported by a corresponding Pattern Block. Although Pattern Blocks are available as an aesthetic for all heights, they are a required feature for heights over 60″. Without them and the pickets are vulnerable over the years and decades to the misbehavior of bowing.

The standard narrower top horizontal rail.

Wood open fence #6, Prowell

CUSTOM WOOD GARDEN FENCE #16-5

Mill Valley, CA

Fence Style #16-5 shown with Garden Gate style #32.

Left to a natural weathering. Although photographed here days after the installation, the cedar will age to a silvery gray in 2+ years. Premature weathering, or Pre-Weathered’ Finishes are available. See Finish Options

Wood fence #16 in Mill Valley, CA. Prowell

CUSTOM WOOD GARDEN FENCE #16-5

Mill Valley, CA

Along the front entrance, as viewed from within the property.
Accompanied by a sliding Driveway Gate #4

Wood fences and gates in Mill Valley, CA. Prowell

CUSTOM WOOD GARDEN FENCE #16-5

Mill Valley, CA

Always nice to glimpse a ‘before’ photo.

Custom wood fence 16. Prowell

WOOD GARDEN FENCE #16-1

Narrower top rail width but more complex Pattern Block layout
Berkeley, CA

Here we illustrate Wood Fence Panel #16-1 with the Pattern Blocks with a total height of only 42″ height. In this example, the Pattern Blocks are totally aesthetic and are not required to stabilize the pickets.

Shown with Gate Design #57-1

custom wood fence Panels #16 in Berkeley, CA

CUSTOM WOOD GARDEN FENCE #16-1

Although the pattern layouts are almost infinite, we would prefer, going forward, with patterns adhering to #16-9.

Custom wood fence Panels in the San Francisco Bay Area

WOOD GARDEN FENCE #16-6

Narrower top rail width but more complex Pattern Block layout
Healdsburg, CA (Sonoma County)

Wood Fence Panels #16-6 as a deck enclosure, along with Gate style #32. The top 2×6 cap is not included.

custom wood garden fence #16-6. prowell

CUSTOM WOOD GARDEN FENCE #16-6

Healdsburg, CA (Sonoma County)

The gate itself is flanked by a pair of black wire grid panels that help to corroborate the open, airy aesthetic of the fence panels.

WOOD GARDEN FENCE #16-3

Full width top rail width and the more complex Pattern Block layout
Palo Alto, CA

As a single flanking Fence Panel to Gate style #32 in Palo Alto, CA .

custom wood fence Panels in Silicone Valley, California

CUSTOM WOOD GARDEN FENCE #16-3

Custom wood fence Panels in California

WOOD GARDEN FENCE #16-7

Alameda, CA

Custom wood garden fence #16-7. Prowell

CUSTOM WOOD GARDEN FENCE #16-7

Alameda, CA

custom wood garden fence #16-7 in Alameda, CA. prowell

WOOD GARDEN FENCE #16-2

Narrower top rail width and more complex Pattern Block layout
Sonoma County, CA

Shown with Gate styles #32.
Gate is Base Cost
Total height of only 42″

Custom Wood Fence Panels #16-2 in Sonoma County

WOOD GARDEN FENCE #16-4

(Maximum of one joint per panels )
Sonoma County, CA

Wood Fence Panels #16-4 is distinguished by a need for semi-radius fence-lines. Instead of actually creating a laminated bent horizontal rail, the panels are instead joined at junctures between the posts with a maximum of two joints per panel. This, in conjunction with the setting of the site fence posts, can simulate a radius layout by means of joinery rather than laminations.

Joined panels have a maximum width of 36″.

custom wood fence Panel #16-3 in San Francisco bay area

CUSTOM WOOD GARDEN FENCE #16-4

Sonoma County, California

Here we see a series of fairly narrow panels with a single radius joint per panel.

Custom Wood Fence Panels in Sonoma County, CA

WITHOUT PATTERN BLOCKS
(Limited to 60″ maximum net ht)

WOOD GARDEN FENCE #16

No Pattern Blocks

Fence Style #16 (shown flanking Gate Style #32).

An example of a maximum height of 60″ and no Pattern Blocks.

custom wood fence Panel #16

CUSTOM WOOD GARDEN FENCE #16

Dallas, TX

Open Picket Garden Fence and Gate in Dallas, TX. The neighborly Fence Design #16 makes a suitable enclosure for a small existing patio.

Fence style #16 is limited to Limited to 60″ height. With the uniform spacing between pickets, any variation from a bowed or cupped picket is readily noticeable. For heights beyond 60″, see #16-1 below.

Shown with Garden Gate Style #32.

Custom Wood Fence Panels #16 by Prowell Woodworks

CUSTOM WOOD GARDEN FENCE #16

Dallas, TX

Any of the fence designs that provide solid panels would, in this application, have reduced the existing patio enclosure with a much greater sense of diminished space.

Two narrow 10″ flanking Wood Fence Panels serve to offset the gate from the almost identical panels.

custom wood fence Panels in Texas

CUSTOM WOOD GARDEN FENCE #16

Dallas, TX

Now and again we’re sent a ‘before’ photo. What the homeowner’s are accomplishing is a semi-private courtyard no longer openly exposed to the sidewalk and street.

The courtyard Wood Fence Panels #16 allows light penetration, as well as visibility.

custom wood fence Panel in Texas

IN-PROGRESS

WOOD GARDEN FENCE #16–PROGRESS

Dallas, TX

Each leading edge is trued on the joiner before the pickets themselves are ripped initially on the bandsaw to prevent bowing. From the bandsaw, they go through the thickness planer to create the final net width, and from the planer to the drum sander for the finished edge sanding. Although this process weeds out 90% of the potentially bowed pickets, the insistence for true and straight pickets is furthered by the use of the Pattern Blocks joined to each picket such that no single picket is left alone and vulnerable to the ravages of solitude.

building a prowell fence #16

WOOD GARDEN FENCE #16–PROGRESS

The Pattern Blocks are mortised and joined individually to their corresponding pickets. Shown below, the importance of a square layout when clamping to insure the ends of the pickets are even.

building a prowell fence #16-8

Similar Prowell Fence Styles

WITH LOWER PRIVACY PANELS AND UPPER PICKETS OR GRIDS

wood fence
The Designs of Prowell Woodworks are protected by Patents and Patents Pending.

abstract separator
Gallery #1 Garden Gates
Gallery #1A Garden Gates
Gallery #1B Garden Gates
Gallery #1C Garden Gates
Gallery #200 Series Garden Gates Plus
Gallery #2 Driveway Gates
Gallery #3 Fences
Gallery #4 Arbors
Gallery #5 Columns
Gallery #6 Benches/Swings
Gates Pricing
Fences Pricing
Driveway Gates Pricing
Columns Pricing

#16 ——0547-Herze
#16-1 —-0741-Winsberg
#16-2—- 0234-Voge
#16-3–1429-Fuery
#16-4— 0234-Voge
#16-5– 1623-Hawthorne
#16-6–1846-Tanoury
#16-7—1856– Ramiza

Cropped image: 0690-Cohen