WOOD GARDEN GATES #38

This Garden Gate is Base Price + 9%
Go to Base Price Table

WOOD GARDEN GATES #38-6

Typical Wood Gate #38.
WoodRX Teak finish.

To Pre-finish Options

cropped image showing craftsman garden gate #38

WOOD GARDEN GATES #38-6

San Diego, CA

A straight forward photo that illustrates the basic pattern of the Arts and Crafts garden gate #38. The pattern varies to accommodate different gate widths. The same basic layout, but for the slight changes when the wider widths requires additional pickets, as illustrated in the examples below.

Site photo showing arts and crafts garden gate #38-6 in san diego, california

WOOD GARDEN GATES #38-6

San Diego, CA

We’ll include a ‘before’ photo of the house, simply because it’s charming.

photograph showing the house before the installation of the Arts and Crafts garden Gate #38-6 in San Diego, california

WOOD GARDEN GATES #38

(With the upper open mortised squares)
San Anselmo, CA

This Arts and Crafts Garden Gate represents the original #38, created for a newly renovated Craftsman home belonging to the long-time manager of the Grateful Dead.

site photo showing the original arts and crafts garden gate #38 in San Anselmo, california. circa 1996

WOOD GARDEN GATES #38

San Anselmo, CA

Photographed from within the yard some 20 years later.

Shown with Wood Fence Style #2-10

site photo showing craftsman garden gate #38 in marin county, california

WOOD GARDEN GATES #38-1

(No open mortised squares)
Santa Rosa, CA

Wood gate #38-1 as double gates. Because of the wonderful, but irregular stone, the jambs were mounted to the column’s block core. A measurement was provided from the block to the outermost edge of the stone. Prowell created jambs that were 1/2″ thicker, or deeper, than the provided dimension, allowing free swing and preventing the gate from striking or binding on the stone. — Our overall opening is 79″, and at a height of 83″.
Without the open mortised squares along the top rail

site photograph showing double Craftsman garden gate #38-1 in Sonoma County, CA

WOOD GARDEN GATES #38-1

A closer look at the upper pattern for the craftsman garden gate #38-1.

cropped photo showing a close-up of the upper pattern for the craftsman garden gate #38-1 in sonoma county, california

WOOD GARDEN GATES #38-1

The G640 Lariat Grips from Rocky Mountain Hardware are 16″ C to C, with back plate escutcheons G684 at 24″ length x 3-1/2″. Available with the backplate, or mounted directly to the gate.

photograph showing the rocky mountain gate pulls #G640

WOOD GARDEN GATES #38-1

The inside face of Garden Gate #38-1 as an example of gates without the usual latches, preferring instead the Rocky Mountain grips upon approach and on the inside, from 3rd-party Coastal Bronze Hardware, the #40-700 grips and the 50-400 clasp. Also shown is the #80-100 Cane Bolt. The 50-400 clasp can be secured with a padlock, when away for the weekend. Not a combination we see too often, simply because it disallows entry from the street, and if you disengage the clasp to allow that entry, the gates have no means of latching to a closed position.

site image showing the property side of wood fence gate #38-1 with the cane bolt, gate pulls, and clasp.

WOOD GARDEN GATES #38-4

(With open mortised squares in top rail)
San Anselmo, CA

We include the wood gate #38-4 simply to illustrate that not all of our Garden Gates are flanked by Prowell’s fence panels nor do they all adorn mega-mansions. A hog-wire fence isn’t normally associated with an aesthetic border, and yet it can work, and in fact does appear to work in this setting.An example of a site photo we’d like to see in another couple of years when the fencing is softened with climbing vines.

site photograph of wood fence gate #38-4 in San Anselmo, california.

WOOD GARDEN GATES #38-3

Santa Barbara, CA

Wood gate #38-3 illustrating a slightly varied grid pattern. Finished by the homeowners with WoodRX Ultra ‘Natural’ with the upper grid and lower pickets, and WoodRX ‘Chestnut’ for the stiles and rails. The overhead arbor is provided by the homeowner. Rocky Mountain Gate Latch E414.

house photo showing wood fence gate #38-3 in Santa Barbara, california

WOOD GARDEN GATES #38-3

Santa Barbara, CA

The side wood fence gate, as with #38-4, illustrates how it is acceptable to couple the open style of the #38 with a clean wire fence construction. Rocky Mountain Gate Latch E414

showing the side arts and crafts garden gate #38-3 in santa barbara, california

WOOD GARDEN GATES #38-3

Santa Barbara, CA

A close look at the upper pattern of the garden gate #38-3, which varies more with the given net widths than any of our other designs.

cropped image showing the upper pattern of the craftsman garden gate #38-3

ACCOMPANYING DRIVEWAY GATE #20

Santa Barbara, CA

The matching Driveway Gate #20

Rocky Mountain Gate Latch E414

showing the matching driveway gates #20 in santa barbara, california

WOOD GARDEN GATES #38-5

Arts and Crafts garden gate #38-5 features an augmented grid off the bottom rail and borrows the partial arch of Gate #53

a cropped image showing arts and crafts gate 38-5 with an arching top

WOOD GARDEN GATES #38-5

. . and in doing so has apparently attracted the attention of the local paparazzi.

humorous cropped image showing gate #38-5

WOOD GARDEN GATES #38-7

Berkeley, CA

Wood gate #38-7 in Marin County, CA as a Double-Off-set and flanking panel style #2
Double gates utilize the hardware shown below:
Cane Bolt #CB
Gate Stop
Rocky Mountain Gate Latch E414

(The only one of these three you’re required to use is the Gate stop. The latch and cane bolt can be sourced elsewhere, if you prefer.)

See more on Double Off-Set Garden Gates

site photograph showing double off-set wood fence gate 38-7 with flanking fence panels in Berkeley, California

IN-PROGRESS
How do I build a wood gate?

WOOD  GATE #38–PROGRESS

The upper pattern is assembled and glued to the top and mid rails, followed by the lower pickets glued to the upper section and bottom rail, followed by the stage shown below

photo in the shop of charles building wood fence gate #38

WOOD  GATE #38-PROGRESS

shop photo showing Ben prowell planing the craftsman wood gate #38

GATES WITH UPPER GRIDS

GATES WITH UPPER GRIDS

wood fence
The Designs of Prowell Woodworks are protected by Patents and Patents Pending.

abstract separator
Gallery #1 Garden Gates
Gallery #1A Garden Gates
Gallery #1B Garden Gates
Gallery #1C Garden Gates
Gallery #200 Series Garden Gates Plus
Gallery #2 Driveway Gates
Gallery #3 Fences
Gallery #4 Arbors
Gallery #5 Columns
Gallery #6 Benches/Swings
Gates Pricing
Fences Pricing
Driveway Gates Pricing
Columns Pricing

38—-#9910-Sears
38-1-0940-Schlesinger
38-2–#0219-Simmons
38-3–1329-Townsend
38-4—0906-Gosliner
38-5–1419-Tondro
#38-6–1423-Yung
#38-7–1633-Orebic

Progress
38-3/cp–1620-Hughes
38-3/ben– 1329-Townsend