WOOD GARDEN GATES #71
This Garden Gate is Base Price + 8%
Go to Base Price Table
Mill Valley, CA (Marin County)
Garden Gates #71 is designed for the Ranch and Prairie style architecture.
Garden Gates #71-4 at the optional 2-1/4″ thickness. Although all gates over 48″ net width default to the 2-1/4″, it is occasionally preferred for widths as narrow as 36″, as with the 74-4
Mill Valley, CA
Horizontal garden gate design #71-4 wrapped by a third-party horizontal fence. Pretty much what we had in mind in creating the original #71.
Mill Valley, CA
The upper pattern of the horizontal gate design 71-4 suddenly becomes an aeration portal to an otherwise city fortress.
Kentfield, California (Marin County)
Garden Gate #71-5 shown with lower pickets. The example shown has picket spacing at only 3/4″.
Also showing the left leaf of Driveway Gate #11-1.
Garden gate #71-5 shown with a modified version of wood fence panels #15 .
Kentfield, CAThe pedestrian garden gate #71-5 on the left, shown with driveway gate #11, and fence panels #15. .
Greenbrae, CA (Marin County)
Garden Gate #71 in Greenbrae, CA (Marin County)
Shown with accompanying Wood Fence style #38.
(See Pre-finish Options)
photo: Ben Prowell 2020
Prowell’s Fence Style #38.
WoodRX –Classic PT
Most commonly associated with wood garden gates #71.
For panels between 36″ and 60″ width, we introduce a center vertical stile within the lower planks to insure the stable rigidity of the T&G horizontal planks.
Fence style #38-1 is Base Cost +12%
The garden gate design 71-1 and Fence Style #38-1 both feature the slight modifications of wider horizontal rails.
Gate #71-2 is identical to #71 but for the vertically aligned lower panel and a slight modification to the upper grid dividers created for the shorter gate heights.
Note: the below cropped photo is shown with ‘Face Grain’, or figured cedar. In 2010 we began spec’ing our orders from the mil as the more stable vertical-grain only.
Showing the wood garden gate and the perimeter Fence Style #15.
Like garden gate #71-2 and #71, wood Fence #15 is also identical to wood Fence #38 but for the vertically aligned lower planks.
To clarify the common associations:
Main Gate #71 and Fence #38.
Main Gate #71-1 and Fence #38-1
MainGate #71-2 and Fence #15
Marin County, CA
The original horizontal wood garden gate design on the far right, with a single horizontal lower panel and without the center vertical stile (The gate width is only 36″, thus no lower center stiles separating the T&G is needed)
Shown with the accompanying driveway gate #11.
Profile of a milled plank joinery often used by Prowell. A little more involved than a standard off-the-shelf tongue and groove.