CUSTOM WOOD ARCHING ARBOR #10

PRICING Maximum 4′ width
between posts
Maximum 6′ width
between posts
3″ T x 3-1/2″ W $1,425 $1,950
3″ T x 5-1/2″ W $1,750 $2,400

Custom wood arching arbor #10

#10

CUSTOM WOOD ARBOR #10

When mounting to surfaced 6×6 posts, the arbor truss is 5-1/2″ Wide x 2-1/4″ Thick. When mounting to surfaced 4×4 posts, the arbor truss is 3-1/2″ W x 3″T. Both applications require mounting caps as shown. When mounting to masonry/stone/brick columns, mounting caps are not necessary.

Dana Point, CA

A lovely cottage with our Wood Garden Arbor with Arch #10 shown with the often-accompanying Gate #25.

Rocky Mountain gate latch E501

* The arbor clearance should be between 80-84″. From the top of your posts, the radius height is 1/2″ the distance between the posts. If, for example, the posts are 48″ apart, The arbor will have a radius of 24″. To achieve 84″ clearance, the posts will be cut at 60″ off the grade. All of which is shown on your eventual dimension drawings.

 

#10-3

CUSTOM WOOD ARBOR #10-3

Palo Alto, CA

Arbor #10-3 with Garden Gate style #8, resulting in a full circumference portal.

3″ thickness x 5-1/2″ width.

wood garden gate and arching arbor #10

WOOD GARDEN ARBOR #10-3

Palo Alto, CA

The radius of the #10 arbor is affected by the width between the posts. As a true 360-degree arch, coupled with the same feature of the gate #8 demands a specific height of the gate. All of it shown on the dimension drawings posted for your review prior to any work in the shop. An opportunity to consider the complexities.

custom wood arbor #10 with Wood Gate #8

#10-1

CUSTOM WOOD ARBOR #10-1
(+ 10% with Keystone)

Great Falls, Virginia

Garden Arbor #10-1 with Garden Gate #8-3 is posted, in part, as an example of our homeowner electing to manage the finish process themselves and deciding upon a product that is billed to bring out the natural beauty of wood. It is essentially an oil product and while it clearly enhances the wood, it is also a product that stipulates only one coat. The splotchy appearance seen below is the result of successive coats laying on top of the initial coat and as a result, unable to absorb evenly. But more . . . oil finishes such as this have a lifeline of approximately one year before requiring maintenance. Oil finishes that ‘enhance the wood’ are probably the biggest myth of exterior finishes. Subjected to the elements, such an approach is to buy into a future of relentless upkeep, without prolonging the life of the assembly by one day.

Review the Pre-Finish Options not necessarily as a requirement to have us finish your product, but moreover as a means to insure you settle on the right product. The various options are provided with links so they can be purchased direct from the dealer or manufacturer should you choose to manage the finish yourself. They have been culled from all the products on the market and although the grades of western cedar we spec from the mill do not require a finish or any treatment to prolong the life of the wood, the aesthetics often suggest a finish. Whether we apply this or you apply it, it’s important to use the right product.

custom wood arbor #10 with Arches in Virginia

#10-2

CUSTOM WOOD ARBOR #10-2

Lakeside, Michigan

Garden Arbor with Arches #10-2 in the upper Michigan lake district. Shown without Mounting Caps, where the arbor arrives with embedded threaded rod that is in turn fitted to corresponding holes set into the site posts.

custom wood garden arbor #10-2 with arches in Michigan

CUSTOM WOOD GARDEN ARBOR #10-2

Lakeside, Michigan

Also showing on the left the same Wood Arbor #10. Both arbors accompanied by Prowell gates that appear to be isolated, leading, leading . . . somewhere.

Arching wood arbor #10-2 in Michigan

#10-4

CUSTOM WOOD ARBOR #10-4

Kamuela, Hawaii

Arbor #10 with it’s popular companion, Gate #25 in Hawaii.

custom wood garden arbor #10-4 in Hawaii. Prowell

CUSTOM WOOD GARDEN ARBOR #10-4

Kamuela, Hawaii

A new home in the largely rural Kamuela, with the gate and arbor positioned in anticipation of some corroborating hardscape.

#10-5

CUSTOM WOOD ARBOR #10-5

Guerneville, CA (Russian River, Sonoma County)

Gate Arbor #10 with Garden Gate #25 flanked by 3rd-party fence.

arching Arbor #10 with Garden Gate #25. Prowell

CUSTOM WOOD GARDEN ARBOR #10-5

Guerneville, CA (Russian River, Sonoma County)

Arching wood Arbor #10 in Sonoma County. Prowell

IN-PROGRESS

WOOD GARDEN ARBOR #10–PROGRESS

The segmented sections ready for glue-up.

WOOD GARDEN ARBOR #10–PROGRESS

Scribing the arc with a radius stick.

Using a radius stick to create arching arbors

WOOD GARDEN ARBOR #10–PROGRESS

Laying out the bottom angle

creating the arbor arch. prowell

WOOD GARDEN ARBOR #10–PROGRESS

building an arched arbor, prowell

WOOD GARDEN ARBOR #10–PROGRESS

Truing the arch.

WOOD GARDEN ARBOR #10–PROGRESS

The threaded rod and site-boring templates for mounting to the site posts.

wood fence
The Designs of Prowell Woodworks are protected by Patents and Patents Pending.

abstract separator
Gallery #1 Garden Gates
Gallery #1A Garden Gates
Gallery #1B Garden Gates
Gallery #1C Garden Gates
Gallery #200 Series Garden Gates Plus
Gallery #2 Driveway Gates
Gallery #3 Fences
Gallery #4 Arbors
Gallery #5 Columns
Gallery #6 Benches/Swings
Gates Pricing
Fences Pricing
Driveway Gates Pricing
Columns Pricing

#10–(0720-Leach)
10-1—(1226-Vitale)
10-2–(0828-Bumbar)
0928-Lee
#10-3–1648-Lungren
#10-4-1808-Carnett
#10-5– 1713-Jacobson